BLWBB - CALIBERATING GAS

  • MSDS: BLWBB
  • Manufacturer: SCOTT SPECIALTY GASES
  • Product Name: CALIBERATING GAS
  • National Stock Number: 6830-00-182-6315
Product Identification

Product ID:CALIBERATING GAS
MSDS Date:10/16/1989
FSC:6830
NIIN:00-182-6315
MSDS Number: BLWBB

Responsible Party
SCOTT SPECIALTY GASES
ROUTE 611 NORTH
PLUMSTEADVILLE, PA 18949
US

Emergency Phone: 215-766-8861

Info Phone: 215-766-8861

Cage: 51847

Contractor
UNION CARBIDE CORP MATERIALS SYSTEMS DIVISION
CLEVELAND, OH 44101 US

Telephone: 215-766-0416

Cage: 05397

Ingredients

OXYGEN

CAS: 7782-44-7

RTECS: RS2060000

Fraction By Weight: 21-22%


NITROGEN

CAS: 7727-37-9

RTECS: QW9700000

Fraction By Weight: 78-79%

ACGIH TLV: ASPHYXIANT; 9192


TRICHLOROFLUOROMETHANE (FREON-11) (SARA III)

CAS: 75-69-4

RTECS: PB6125000

Fraction By Weight: 50% PPM

OSHA PEL 1000 PPM

ACGIH TLV: C, 1000 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


DICHLORODIFLUOROMETHANE (FREON 12) (SARA III)

CAS: 75-71-8

RTECS: PA8200000

Fraction By Weight: 50% PPM

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


DICHLOROTETRAFLUOROETHANE (FREON 114) (SARA III)

CAS: 76-14-2

RTECS: KI1101000

Fraction By Weight: 50% PPM

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 10% PPM

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


METHANE

CAS: 74-82-8

RTECS: PA1490000

Fraction By Weight: 200% PPM

ACGIH TLV: ASPHYXIANT; 9192

Hazards

LD50 LC50 Mixture:LD50 (ORAL RAT) IS NOT APPLICABLE.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE AT ATMOSPHERIC PRESSURES.
CHRONIC: NONE.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:NONE
Medical Cond Aggravated by Exposure:NONE

First Aid

First Aid:INHALATION REMOVE TO FRESH AIR.

Fire Fighting

Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:MIXTURE CONTAINING 21% OXYGEN SUPPORT
COMBUSTION.

Accidental Release

Spill Release Procedures:EVACUATE ALL PERSONNEL FROM RELEASE AREA.
Neutralizing Agent:NOT APPLICABLE.

Handling

Handling and Storage Precautions:PROTECT CYLINDERS FROM PHYSICAL
DAMAGE. STORE AWAY FROM EXTREME HEAT. KEEP CYLINDER VALVES CLOSED
WHEN NOT IN USE AND WHEN EMPTY.
Other Precautions:DO NOT DEFACE CYLINDERS OR LABELS. HANDLE CYLINDERS
WITH PROPER CAUTION.

Exposure Controls

Ventilation:LOCAL EXHAUST
Protective Gloves:WORK GLOVES FOR HANDLING CYLINDERS.
Eye Protection:APPROVED SAFETY GLASSES OR FACE SHIELD.
Other Protective Equipment:SAFETY SHOES AND HEARING PROTECTION.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. USE PROPER CARE WHEN HANDLING AND STORING
CYLINDERS.
Supplemental Safety and Health
CALIBERATING GAS IS MOSTLY COMRESSED AIR, IT CONTAINS CONTAINS
NGLIGIBLE AMOUNTS OF: 200 PPM MATHANE, 50 PPM FREON 114, 50 PPM
UCON 11, 10 PPM HEXANE. MRF SENT MSDS FOR EACH CONSTITUENT, BUT ALL
MSDS' S WERE COMBINED INTO ONE.

Chemical Properties

HCC:G3
Boiling Pt:B.P. Text:-318F,-194C
Vapor Pres:GAS
Vapor Density:1.0
Solubility in Water:18.7 CM3/L
Appearance and Odor:COLORLESS, ODOR LESS GAS
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:SMALL AMOUNTS OF PHOSGENE, HDROGEN
CHLORIDE AND HYDROGEN FLOURIDE MAY BE PRODUCED

Disposal

Waste Disposal Methods:MOVE LEAKY CYLINDER TO OUTDOORS OR VENTILATED
HOOD. ALLOW GAS TO DISCHARGE AT MODERATE RATE. REMOVE ALL FLAMMABLE
MATERIALS FROM VICINITY. DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
ALL APPLICABLE FED ERAL, STATE AND LOCAL LAWS AND REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.